Zetron Model 6 (M6) FFSK-702 Fire Station Transponder. (Without Handset).

Description

This listing is for One(1) Zetron Fire Station Alerting
Transponder Model 6 (702) Station controller
Item History: The Zetron Model 6 was working when removed from a fire station. The M6 was removed by a service technician, cleaned up and tested before listing.
Model 6 Firmware Version is 3.2
Bulk pricing is available upon request. We have other Zetron Model 6/26 parts available upon request.
International Buyers Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as "gifts" - US and International government regulations prohibit such behavior.
SPECIFICATIONS
MODEL 6 SPECIFICATIONS
Controls
Eight push-buttons: two for each vehicle to change and acknowledge vehicle status
Indicators
Thirty Light Emitting Diodes: (7 LEDs/ vehicle display status and 2 LEDs to indicate “transmit” and “PA” activity.
External Inputs
Four opto-isolated inputs for status monitoring. Inputs may be configured to detect contact closure or voltage level
Control Relays
Four undedicated, independently controlled DPDT relays Contacts rated at: 10 A at 30 VDC or 120 VAC 10 A at 240 VAC 1/3 HP at 120 VAC
Field Configuration
Using a terminal plugged into the Model 6 the following parameters can be set: Communications mode; Key-up delay; Retry period; Enable/disable units for status display; Relay activation criteria; Relay reset criteria; Tones output by alert commands; Tone ramp-up time and duration; Polarity of external inputs Model 6 address set by DIP switches Other functions set by jumpers
Data Signaling
1200 baud FSK. Protocol includes automatic acknowledgment of each transmission and automatic retries after time-out
Receiver Interface
10K ohm or 600 ohm balanced, DC blocking audio input, -40 dBm sensitivity, COR input or internal VOX detection
Transmitter Interface
600 ohm balanced audio output at -45 to 0 dBm
PA Interface
600 ohm balanced audio output at -45 to 0 dBm. DPDT audio switching relay, DPDT PTT relay
Power Requirements
120 VAC (+/- 10%), 50/60Hz power supply included. Unit may also be powered by external 12 to 15 VDC (unregulated) power supply, 1.5A maximum current
Operating Temperature
0 to +65 degrees Celsius Size 13"H x 9"W x 4.5"D (W = 13" with handset)
Weight 8 lb
FCC Compliance
Complies with Part 15 of FCC rules
Handset/
Hook switch
Supports half-duplex use of communications channel for “talk- back” from station to dispatch center Also supports local PA announcements
Communications circuit SPECIFICATIONS
Communications
Media VHF/ UHF/ 800 MHz/ 900 MHz radios (local control only – requires separate tone panel for tone remote operation) Leased telephone lines
WE PROVIDE A DOA WARRANTY
See Shipping/Payment tab for further warranty details
Pictures are representative and may not be exact item sold, unless specified.
PAYMENT AND SHIPPING DETAILS
For any shipments requiring
freight truck
, please contact us directly and provide us with:
The type of location - residential or commercial
The delivery zip or postal code
If there will be a fork lift or lift gate available
Are there any other special requirements?
(e.g. specific time or appointment required for delivery)
We generally ship UPS.  If you prefer Fedex or other carriers, please provide us with your shipper number
.
I
NTERNATIONAL CUSTOMERS:
Delivery times expected to be around 14 business days, but may take as long as a month depending on your customs clearance.  Customer may be subject to other duties at time of delivery imposed by importer/customs not by Seller.  We ship primarily domestic.  You will be required to provide necessary documents for import or accept a delay in processing and/or
cancellation
and refund of your order.  We will not make or accept any “invoice” adjustments on amount to alter import fees.
UTAH RESIDENTS:
Ebay
does not have a per-county calculator.  SL County, UT tax is currently being collected at 7.25%. If this is a tax exempt purchase please contact us for invoice modification prior to check-out.
Utah shipments will not be processed until sales tax has been collected or a sales tax exemption certificate has been obtained from buyer.